Power Point Safety Cover

The Mickey Ha Ha Power Point Safety Cover completely stops children having access to power points whether in use or not. The clear rounded design allows the user to see the status of the power point without removing the cover but stops children being able to pull plugs out or turn switches on or off. The base fits snuggly around the power point and the top cover clips on to the base with 2 child resistant catches. Appliance cords are directed out through slots in the cover.

The cover can be turned so cords can be directed out either the top or bottom. Perfect for higher points such as air conditioner plugs to stop cords dangling. For people who don’t have children but have children visit and for flexibility, the base can be left on permanently and the top clipped on when needed. Ideal for those who like to change their furniture around.

The Micky Ha Ha Power Point Safety Cover is also ideal for workshop areas where dust, dirt, sparks etc. are a problem. The safety cover protects the power point and stops accidental unplugging.

The Power Point Safety Cover is available from selected stockists

Click here for more information.

Would you like to download more information? click here 151kb

Installation and Care
The Micky Ha Ha Power Point Safety Cover comes complete with two adhesive strips located on the top and bottom of the base. To attach, simply peel off the outer tape cover and firmly press onto a cleaned and dried flat surface. The adhesive increases in strength over 24 hours so minimal handling at first is recommended.

For non-painted surfaces or for more permanent installation, there are two locating holes in the top and bottom of the base.

Contacting your local electrical contractor would be recommended.

Clean your Micky Ha Ha Power Point Safety Cover is as simple as using a damp cloth. DO NOT use solvent-based cleaners, abrasive cleaners or harsh chemicals as discoloration could occur and can damage the surface.